Flir lepton camera module pro#
Flir lepton camera module software#

Teledyne FLIR Lepton FS is currently available on GroupGets for $99 plus shipping in limited quantities (100 units). With this kit you will be able to be able to bring FLiR’s thermal imaging.

Flir lepton camera module pro#

Since Lepton FS is mechanically and electrically compatible with FLIR Lepton 2 to 3.5 thermal camera modules, it can fit into existing boards with the appropriate socket such as PureThermal Mini Pro JST-SR, the ESP32-based tCam-Mini IR thermal camera board, OpenMV OureThermal, and others. This is the FLiR Dev Kit, a small and easy to assemble breakout for the Lepton® longwave infrared (LWIR) imager. While the Lepton FS is not suitable for radiometric applications, the module can still be used for heat, security, and comfort monitoring applications in the fields of home and building automation, heat and occupancy sensing, or security and location monitoring. Temperature Range – Operating: -10C to +65C storage: -40 C to +80 C.Input supply voltage – 2.8 V, 1.2 V, 2.5 V to 3.1 VIO.Host interfaces – SPI for video data, CCI (I2C-like) for control.Output format – User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied).Image optimization – Factory configured and fully automated.Low Gain Mode: -10 to 350 degrees C typical.High Gain Mode: -10 to 140 degrees C typical.Non-uniformity corrections – Integral Shutter.English English French German Italian Russian Spanish Portuguese Dutch Greek Japanese Korean Arabic Hindi Turkish Polish. Output image independent of camera temperature. Good quality flir lepton camera module from flir lepton camera module manufacturer, Buy flir lepton camera module online from China.Effective frame rate 8.7 Hz (commercial application exportable).Array format – 160 x 120, progressive scan.Spectral range – Longwave infrared, 8 μm to 14 μm.Sensor technology – Uncooled VOx microbolometer.

Flir lepton camera module software#

But Ron Justin, GroupGets founder, told CNX Software that the lower specs are more than worth it for users only needing an imager, as opposed to a radiometric sensor. The FLIR Lepton Infrared Thermal Imaging module allows your OpenMV4 H7 to see infrared imaging diagrams, 160×120 resolution. The lower cost was achieved with some tradeoffs, notably a reduction of thermal sensitivity and scene dynamic range, as well as up to 3% inoperable pixels. The radiometric Lepton captures temperature data in every pixel of each. Teledyne FLIR Lepton FS offers a much more cost-effective solution with the non-radiometric 160 x 120 resolution micro thermal camera module going for $99, or about 50% less than other FLIR thermal camera modules. Teledyne FLIRs Lepton is a radiometric-capable LWIR cost effective camera core. Thermal cameras based on FLIR Lepton modules are pretty cool, but also quite expensive.